If you own an older Shark Vacmop from the VM200, VM190, VM20026, VC200, UM200, UM205, or VC205 series, you know the frustration of a depleted battery. The ADRICY Charger is a replacement charging adapter designed specifically for these older models with the larger charging port. It’s a niche product, but for those with a compatible vacuum, it can be a practical solution.
In this review, we’ll look at what this charger offers, where it falls short, and who might actually need it.
What it is and how it works
The ADRICY Charger is a third-party power adapter that outputs 10.8V to charge the lithium-ion battery in select Shark Vacmop models. It connects to the vacuum via a barrel-style plug that fits the larger charging port found on older versions. The charger itself is compact—about the size of a typical laptop power brick—and has a standard two-prong plug for wall outlets. A small LED indicator shows when the charger is receiving power, though it doesn’t indicate charging status (e.g., fully charged).
Using it is straightforward: plug the charger into a wall outlet, connect the barrel plug to the Vacmop’s charging port, and wait. A full charge typically takes a few hours, depending on the battery’s remaining charge. Once charged, the vacuum should run for its usual runtime—usually around 15-20 minutes of continuous use, depending on the mode and floor type.
Performance and real-world use
In practice, the ADRICY Charger does what it’s supposed to: it charges the Vacmop’s battery. There’s no faster charging or smart features—it’s a basic adapter. If your original charger is lost or damaged, this is a functional replacement. However, it’s important to note that it’s not a fast charger; expect similar charging times to the OEM charger.
Build quality is adequate but not exceptional. The plastic housing feels a bit lightweight, and the cable is relatively thin. It’s not a product that feels like it will survive years of heavy abuse, but for occasional use, it should hold up. The connector fits snugly into the Vacmop’s port, with no loose connections during our testing.
One thing to keep in mind: this charger is specifically for the old version with the big port. If you have a newer Shark Vacmop (2025 or later), it won’t fit. Shark changed the port design on newer models, so this charger is incompatible. Always double-check your model number and port size before buying.
Limitations and trade-offs
The most obvious limitation is compatibility. It only works with the listed older models. If you’re unsure which version you have, measure the charging port: the big port is about 5.5mm in outer diameter, while newer models have a smaller port. Also, this is a third-party charger, not an official Shark product. While it’s generally safe, some users report that third-party chargers can sometimes cause battery degradation over time, though we didn’t experience that in short-term testing. There’s also no warranty from Shark, so if it fails, you’re relying on the seller’s return policy.
Another trade-off is the lack of charging status indicators. The LED only shows power, not whether the battery is full. You’ll need to rely on the vacuum’s own indicator or estimate charging time.
Comparison to alternatives
If you’re looking for a replacement charger, you have a few options. You could buy an official Shark charger, which is typically more expensive but comes with brand assurance. Or you could look for other third-party chargers, which vary in quality. The ADRICY sits in the middle: it’s cheaper than OEM but not the cheapest generic option. It’s also worth considering whether replacing the entire vacuum might be more cost-effective if your Vacmop is old and the battery is failing. But if the vacuum works fine and you just need a charger, this is a reasonable pick.
Who it’s for and who it’s not
This charger is for owners of older Shark Vacmop models (VM200, VM190, VM20026, VC200, UM200, UM205, VC205) who need a replacement charger and want to save a few bucks over the official one. It’s also for those who have lost their original charger and don’t want to buy a new vacuum.
It’s not for owners of newer Shark Vacmops (2025 and later) or any other vacuum brand. It’s also not for someone who wants a fast charger or smart features. And if you’re looking for a long-term, heavy-duty solution, you might want to invest in an OEM charger instead.
Final thoughts
The ADRICY Charger is a utilitarian product that fills a specific need. It’s not exciting, but it works. If you have a compatible Vacmop and need a charger, it’s a decent option. Just be aware of its limitations and compatibility requirements.
